产品

FQM/FQMEx SIL

部分回转执行器

随着FQM故障安全装置的推出，AUMA使用储藏的机械能为紧急情况下的阀门自动化操作提供创新且安全的执行器解决方案。

恒定力矩贯穿整个行程。

常规操作过程中弹簧不会被操作。因此，执行器型号可相对小一些。

在开到位和关到位设置过程中，终端位置开关是自动设置，无需单独调节。

产品

SVC/SVCR

多回转执行器

配置一体化控制装置的“小型”电动截止阀执行器。所有参数均直接在执行器上设置。执行器控制装置包括接触器、供电单元以及DCS通信接口等组件。当到达阀门终端位置、检测到电机过热或发生力矩过载时，控制装置会自动关闭执行器。

所有外壳组件均为铝质产品。因此，该系列执行器重量极轻。

SVC系列执行器可分为开关型和定位调节型（A类和B类）/（短时工作型S2 - 15 min）、SVCR系列执行器为调节型（C类）S4 - 40%。

产品

PROFOX-Q

部分回转执行器

闸阀、蝶阀、球阀/旋塞阀和截止阀的自动化解决方案。是集智能化、紧凑型设计为一体的自动化解决方案。

PROFOX系列执行器均配置一个LED指示灯，也被称为“FOX-EYE”。通过该指示灯，用户对执行器和阀门的状态一目了然。用户可根据实际需要设置LED指示灯（FOX-EYE）的指示方案。

产品

SGC-SGCR

部分回转执行器

配置一体化控制装置的“小型”电动部分回转执行器。所有参数均直接在执行器上设置。执行器控制装置包括接触器、供电单元以及DCS通信接口等组件。当到达阀门终端位置、检测到电机过热或发生力矩过载时，控制装置会自动关闭执行器。

所有外壳组件均为铝质产品。因此，该系列执行器重量极轻。

SGC系列执行器可分为开关型和定位调节型（A类和B类）/（短时工作型S2 - 15 min）、SGCR系列执行器为调节型（C类）S4 - 40%。

Video

Type of seating via the device menu

16.04.2026

This video shows how to manually set the type of seating for a valve on TIGRON multi-turn actuators and how to select between limit-dependent or torque-dependent seating in the end positions OPEN and CLOSE.

Video

Limit switching setting via stroke in the device menu

20.04.2026

In this video, you will learn how to set the limit switching for TIGRON multi-turn actuators via the stroke in the device menu if the valve cannot be operated. For this, you can determine the suitable setting value for the stroke based on your valve data. On the basis of this value, you can then directly set the end position via the menu.

Video

Menu navigation

20.04.2026

This video explains the Combi-Switch on TIGRON multi-turn actuators as the key operation element of the device. It describes the three operation modes LOCAL, OFF and REMOTE as well as the basic operating movements engaging, scrolling and toggling. You will learn how to safely navigate through menus, change settings and operate or configure the actuator locally depending on the mode.

Video

Torque switching setting via the device menu

20.04.2026

In this video, you will learn how to set the torque switching for TIGRON multi-turn actuators via the device menu. For this, you specify the tripping torque for directions CLOSE and OPEN. Once setting is complete, perform a test run to check the correct function of the torque switching.

Video

Limit switching setting via the device menu

20.04.2026

In this video, we show you how to set the limit switching of TIGRON multi-turn actuators (TR‑M30X to TR‑M1000X as well as TR‑MR30X to TR‑MR1000X) via the device menu. For this, run the actuator in end positions OPEN and CLOSED and save them. In addition, you will discover the relevant menu items and receive important information on how to proceed safely – including overrun and eventually the test run.