-
Global
-
Europe
-
Asia and Pacific
-
North America
All results 5152
Product
Linear actuators
Electric linear actuators performing a linear movement for automating globe valves, for example, can be combinations of SA multi-turn actuators and LE linear thrust units. If a lever arrangement has to be operated, the LE linear trust unit can also be mounted onto a base.
To the product
Product
Multi-turn actuators
One solution for gate and globe valves. Compact actuators with intelligent functions as platform concept for tailored automation solutions.
Each PROFOX is equipped with a centrally located LED: The FOX-EYE. It provides clearly visible information about both actuator and valve status. The FOX-EYE display scheme can be configured by the user as required.
To the product
Product
Multi-turn actuators
SAR multi-turn actuators are rated for modulating duty (class C) S4 - 25 %. Special versions for S4 - 50 % and S5 - 25 % are also available.
The actuators can be combined with different actuator controls: From simple OPEN-CLOSE actuator controls to the micro-controlled version with logging of operating data or fieldbus interface.
To the product
Product
Multi-turn gearboxes
GP multi-turn gearboxes in combination with SA multi-turn actuators act as multi-turn actuators with higher output torques.
They are typically used with stem gate and wedge gate valves. Due to their compact design, these gearboxes can also be used in confined spaces.
To the product
Product
Multi-turn gearboxes
If the drive shaft is to be positioned at a certain angle to the output drive shaft, combinations of the SA multi-turn actuators with GST spur gearboxes are used.
The output torque can be considerably multiplied.
To the product
Product
Part-turn gearboxes
In spite of the high degrees of automation, there are still valves requiring manual operation. This is in particular the case if the respective valves are only rarely operated for opening or closing.
The GHE type range with the housing made of bronze is suitable for operating part-turn valves (butterfly valves and ball valves), as predominantly deployed in shipbuilding.
To the product
Product
Part-turn gearboxes
AUMA part-turn gearboxes are used for operating part-turn and special valves (damper, flue gas damper, ball valves).
Product
Industrial Ethernet
HART makes use of the known 4 – 20 mA standard signal for analogue data transmission. HART communication is modulated as additional signal to the analogue signal. Advantages: The digital HART signal can be transmitted simultaneously to the digital signal. The existing 4 – 20 mA infrastructure is thus also available for digital communication. Consequently, this allows for reading additional parameters and diagnostic data from field devices.
HART is based on the host-field device principle. The optional multidrop HART topology essentially complies with the line structures of fieldbus systems. In most cases, the conventional 4 – 20 mA point-to-point communication is used.
To the product
Product
Communication systems
Many different fieldbus systems are available on the market. Certain preferences have evolved on a regional level or specifically to certain plant applications. Since AUMA actuators are implemented in all types of technical process plants around the globe, they are available with interfaces for the different established fieldbus systems within the process automation industry.
Overall, AUMA devices are available with digital and analogue inputs to connect additional sensors to the fieldbus.
To the product
Product
SIMA
SIMA² Master Station is AUMA’s performing platform for the control and supervision of actuators via standardised fieldbus systems. The system optimises communication between host and field level and caters for efficient processes within the installation.
Configuration, operation and asset management of actuators and other field devices are simplified. A large variety of redundancy options maximises plant availability. Comprehensive diagnostic functions ensure perfect installation overview.
To the product
Product
AC (with display)
AC actuator controls are your perfect solution if the application requires self-adapting control functions, data logging, a configurable interface or if valve and actuator are to be integrated into a Plant Asset Management System due to advanced diagnostic functions.
AC actuator controls are equipped with a parallel interface for free configuration and/or interfaces to fieldbus systems as used within process automation.
The diagnostic functions comprise a time-stamped event report, torque characteristics logging, continuous recording of temperatures and vibration within the actuator and, furthermore, counting the number of starts and motor running times.
Further to the basic functions, AC actuator controls offer a number of options to meet special demands. These include torque bypass to unseat valves if tightly seated or functions for extending operating times to avoid water hammer within pipelines.
With the development of the AC 01.2, particular emphasis was laid on user-friendliness and the ease of integration of actuators into the DCS. The large graphic display is used to perform menu-controlled programming of the actuator controls, optionally using AUMA CDT via wireless Bluetooth connection. For fieldbus connections, AC programming can be performed from the control room.
To the product
Product
AC (with display)
AUMA offers sophisticated control for premium safety requirements with AC 01.2-SIL or ACExC 01.2-SIL actuators controls. SA .2 and SQ .2 actuators combined with these actuator controls can be deployed in safety-related system systems up to SIL 3. AC 01.2 actuator controls in SIL version are equipped with an additional SIL module designed for the execution of safety functions. In case of an emergency at the plant and when requesting a safety function, the standard logic of AC is bypassed and the safety function is performed via the safe SIL module. Consequently, the safety function always overrules standard operation. SA .2 and SQ .2 actuators equipped with these actuator controls have been certified by TÜV Nord. They are suitable for the following safety functions:
Product
AC (with display)
Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks, nor hot surface temperatures. Certification is performed in close collaboration with national and international certification bodies. For multi-turn actuators SAEx/SAREx 07.2 – SAEx/SAREx 16.2 and part-turn actuators SQEx/SQREx 05.2 – SQEx/SQREx 14.2, AUMATIC ACExC 01.2 actuator controls with integral local controls are available.
To the product
Product
AM (without display)
AM actuator controls with their straightforward design are the perfect choice when using parallel signal transmission while a relatively low number of feedback signals is required. Few parameters need to be defined via sliding switches during commissioning, e.g. type of seating in end positions. Control is made via operation commands OPEN, STOP, CLOSE. Reaching an end position and collective fault signals are reported back to the DCS as feedback signals. These signals are visually displayed at the local controls via the indication lights. As an option, the valve position can be transmitted as 0/4 – 20 mA signal to the DCS.
To the product
Product
AM (without display)
Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks, nor hot surface temperatures. Certification is performed in close collaboration with national and international certification bodies. For multi-turn actuators SAEx/SAREx 07.2 – SAEx/SAREx 16.2 and part-turn actuators SQEx/SQREx 05.2 – SQEx/SQREx 14.2, AUMA MATIC AMExC 01.1 actuator controls with integral local controls are available.
To the product
Product
Accessories
The lockable protection covers and lock kits prevent unauthorised operation of actuator controls or handwheels.
Product
Accessories
The sunshade is a valuable aid to protect actuator controls against environmental impacts.
To the product
Product
Accessories
Parking frame (PAF) for safe storage of unplugged electrical connections, providing protection against direct touch of open contacts.
The variants equipped with pin carriers allow preserving the available fieldbus connection when disconnecting the actuator controls.
To the product
Product
Multi-turn actuators
SA multi-turn actuators are rated for open-close duty and positioning duty (classes A and B) / (short-time duty S2 - 15 min). Special sizing for longer running times is available for the S2 - 30 min duty.
The actuators can be combined with different actuator controls: From simple OPEN-CLOSE actuator controls to the micro-controlled version with logging of operating data or fieldbus interface.
To the product
Product
Multi-turn actuators
Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks, nor hot surface temperatures.
Certification is performed in close collaboration with national and international certification bodies.
To the product
Product
Multi-turn actuators
With SARV .2 multi-turn actuators for modulating duty paired with ACV 01.2 actuator controls, the proven SA/SAR range is enhanced by variable speed models. AUMA is spearheading market technology by offering a wide speed control ratio of 1:10.
SARV multi-turn actuators are rated for modulating duty (class C) S4 - 25 %. Special versions for S4 - 50 % are also available.
To the product
Product
Multi-turn actuators
A sophisticated sealing system combined with excellent corrosion protection properties qualify AUMA actuators for underwater use.
Double sealed cable glands at the particularly crucial electrical connection safely prevent any ingress of water. Inner seals at all housing covers, sometimes coming in pairs, as well as a solid shaft made of stainless steel complete the universal concept.
To the product
Product
Linear actuators
Electronic actuators with variable speed control. Electronic setting of torque and stroke with function monitoring. Power supply unit with wide range input Actuator applications for demanding control automation tasks in industrial environments with potentially explosive atmospheres.
To the product
Product
Multi-turn actuators
With SARVEx .2 multi-turn actuators for modulating duty paired with intelligent ACVExC 01.2 actuator controls, the proven SAEx/SAREx range is enhanced by variable speed models.
SARVEx multi-turn actuators are rated for modulating duty (class C) S4 - 25 %. Special versions for S4 - 50 % are also available.
To the product
Product
Multi-turn actuators
Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks, nor hot surface temperatures.
Certification is performed in close collaboration with national and international certification bodies.
To the product
Product
Part-turn actuators
Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks, nor hot surface temperatures.
Certification is performed in close collaboration with national and international certification bodies.
To the product
Product
Part-turn actuators
Part-turn actuators of the SQR .2 type range are designed for modulating duty (class C) S4 - 25 %.
Actuators of the SQR .2 type range can be combined with various controls: From simple OPEN-CLOSE controls to the micro-controlled version with logging of operating data or fieldbus interface.
To the product
Product
Part-turn actuators
Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks, nor hot surface temperatures. Certification is performed in close collaboration with national and international certification bodies.
To the product
Product
Part-turn actuators
With SQRV .2 part-turn actuators for modulating duty paired with ACV 01.2 actuator controls, the proven AUMA SQ/SQR range is enhanced by variable operating time models. AUMA is spearheading market technology, offering a wide operating time range with a ratio of up to 1:10.
The part-turn actuators of SQRV .2 range are rated for modulating duty (class C) S4 - 25 %.
To the product
Product
Part-turn actuators
With the SQVEx .2 part-turn actuators for modulating duty, AUMA offers electric actuators with variable operating time, certified for use in potentially explosive atmospheres.
Part-turn actuators of the SQRVEx .2 type range are designed for modulating duty (class C) S4 - 25 %.
To the product