Product

GST spur gearboxes

Multi-turn gearboxes

If the drive shaft is to be positioned at a certain angle to the output drive shaft, combinations of the SA multi-turn actuators with GST spur gearboxes are used.

The output torque can be considerably multiplied.

Product

ACExC

AC (with display)

Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks, nor hot surface temperatures. Certification is performed in close collaboration with national and international certification bodies. For multi-turn actuators SAEx/SAREx 07.2 – SAEx/SAREx 16.2 and part-turn actuators SQEx/SQREx 05.2 – SQEx/SQREx 14.2, AUMATIC ACExC 01.2 actuator controls with integral local controls are available.

Product

Protection cover and lock kits

Accessories

The lockable protection covers and lock kits prevent unauthorised operation of actuator controls or handwheels.

• Protection cover for AC 01.2
• Protection cover for AM
• Protection cover for AMExC
• Lock kit for manual and motor drive
• Lock for manual drive
• Padlocks

Product

LE

Linear thrust unit

Electric linear actuators performing a linear movement for automating globe valves, for example, can be combinations of SA multi-turn actuators and LE linear thrust units. If a lever arrangement has to be operated, the LE linear trust unit can also be mounted onto a base.

Product

AM

AM (without display)

AM actuator controls with their straightforward design are the perfect choice when using parallel signal transmission while a relatively low number of feedback signals is required. Few parameters need to be defined via sliding switches during commissioning, e.g. type of seating in end positions. Control is made via operation commands OPEN, STOP, CLOSE. Reaching an end position and collective fault signals are reported back to the DCS as feedback signals. These signals are visually displayed at the local controls via the indication lights. As an option, the valve position can be transmitted as 0/4 – 20 mA signal to the DCS.

Product

AMExC

AM (without display)

Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks, nor hot surface temperatures. Certification is performed in close collaboration with national and international certification bodies. For multi-turn actuators SAEx/SAREx 07.2 – SAEx/SAREx 16.2 and part-turn actuators SQEx/SQREx 05.2 – SQEx/SQREx 14.2, AUMA MATIC AMExC 01.1 actuator controls with integral local controls are available.

Product

SAREx

Multi-turn actuators

Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks, nor hot surface temperatures.

Certification is performed in close collaboration with national and international certification bodies.

Product

SAR-UW

Multi-turn actuators

A sophisticated sealing system combined with excellent corrosion protection properties qualify AUMA actuators for underwater use.

Double sealed cable glands at the particularly crucial electrical connection safely prevent any ingress of water. Inner seals at all housing covers, sometimes coming in pairs, as well as a solid shaft made of stainless steel complete the universal concept.

Product

SA-UW

Multi-turn actuators

A sophisticated sealing system combined with excellent corrosion protection properties qualify AUMA actuators for underwater use.

Double sealed cable glands at the particularly crucial electrical connection safely prevent any ingress of water. Inner seals at all housing covers, sometimes coming in pairs, as well as a solid shaft made of stainless steel complete the universal concept.

Product

SARV

Multi-turn actuators

With SARV .2 multi-turn actuators for modulating duty paired with ACV 01.2 actuator controls, the proven SA/SAR range is enhanced by variable speed models. AUMA is spearheading market technology by offering a wide speed control ratio of 1:10.

SARV multi-turn actuators are rated for modulating duty (class C) S4 - 25 %. Special versions for S4 - 50 % are also available.

Product

SAR

Multi-turn actuators

SAR multi-turn actuators are rated for modulating duty (class C) S4 - 25 %. Special versions for S4 - 50 % and S5 - 25 % are also available.

The actuators can be combined with different actuator controls: From simple OPEN-CLOSE actuator controls to the micro-controlled version with logging of operating data or fieldbus interface.

Product

SAEx

Multi-turn actuators

Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks, nor hot surface temperatures.

Certification is performed in close collaboration with national and international certification bodies.

Product

TIGRON-M

Multi-turn actuators

The TIGRON is a multi-turn actuator with classic mission: Automation of gate valves with/without rising stem, of globe valves (double block and bleed valves) and in combination with part-turn gearbox of butterfly valves and ball valves.

Virtually unlimited stroke

Rising stems are led through the hollow shaft of the multi-turn actuator which drives the stem in combination with the output drive type A. The stem protection tube protects the stem from pollution and people from injuries.

Open-close duty, positioning duty and modulating duty

TIGRON actuator versions are available for all types of duty. Combinations with multi-turn gearboxes In combination with GK or GST gearboxes, torques up to 16,000 Nm can be reached.

Modular AUMA scheme

Six gearbox type ranges are part of AUMA’s product portfolio. They are ideally suited to complete and enhance TIGRON’s application range even to other valve designs. This includes numerous butterfly valves or the conventional ball valves of the oil and gas industry requiring a part-turn movement of mostly 90 degrees. In these cases, TIGRON is combined with AUMA part-turn gearboxes.

AUMA linear thrust units convert TIGRON’s multi-turn movement into a thrust movement which is required for globe valve automation.

Product

SAV

Multi-turn actuators

With SAV .2 multi-turn actuators for open-close duty paired with ACV 01.2 actuator controls, the proven AUMA SA/SAR range is enhanced by variable speed models. AUMA is spearheading market technology by offering a wide speed control ratio of 1:10.

SAV multi-turn actuators are rated for open-close duty and positioning duty (classes A and B) / (short-time duty S2 - 15 min). Special sizing for longer running times is available for the S2 - 30 min duty.

Product

SAVEx

Multi-turn actuators

With SAVEx .2 multi-turn actuators for open-close duty paired with intelligent ACVExC 01.2 actuator controls, the proven AUMA SAEx/SAREx range is enhanced by variable speed models.

SAVEx multi-turn actuators are rated for open-close duty and positioning duty (classes A and B) / (short-time duty S2 - 15 min). Special sizing for longer running times is available for the S2 - 30 min duty.

Product

SQRV

Part-turn actuators

With SQRV .2 part-turn actuators for modulating duty paired with ACV 01.2 actuator controls, the proven AUMA SQ/SQR range is enhanced by variable operating time models. AUMA is spearheading market technology, offering a wide operating time range with a ratio of up to 1:10.

The part-turn actuators of SQRV .2 range are rated for modulating duty (class C) S4 - 25 %.

Product

SQEx

Part-turn actuators

Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks, nor hot surface temperatures.

Certification is performed in close collaboration with national and international certification bodies.

Product

SARVEx

Multi-turn actuators

With SARVEx .2 multi-turn actuators for modulating duty paired with intelligent ACVExC 01.2 actuator controls, the proven SAEx/SAREx range is enhanced by variable speed models.

SARVEx multi-turn actuators are rated for modulating duty (class C) S4 - 25 %. Special versions for S4 - 50 % are also available.

Product

SQREx

Part-turn actuators

Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks, nor hot surface temperatures. Certification is performed in close collaboration with national and international certification bodies.

Product

SA and GS

Part-turn actuators

When combining SA multi-turn actuators with GS part-turn gearboxes, the combination acts as electric part-turn actuator fulfilling higher torque requirements.

Thus, these combinations represent a complement to the SQ part-turn actuators with their 2,400 Nm torque range limit.

Product

AC-SIL/ACExC-SIL

AC (with display)

AUMA offers sophisticated control for premium safety requirements with AC 01.2-SIL or ACExC 01.2-SIL actuators controls. SA .2 and SQ .2 actuators combined with these actuator controls can be deployed in safety-related system systems up to SIL 3. AC 01.2 actuator controls in SIL version are equipped with an additional SIL module designed for the execution of safety functions. In case of an emergency at the plant and when requesting a safety function, the standard logic of AC is bypassed and the safety function is performed via the safe SIL module. Consequently, the safety function always overrules standard operation. SA .2 and SQ .2 actuators equipped with these actuator controls have been certified by TÜV Nord. They are suitable for the following safety functions:

• Safe OPENING/CLOSING (ESD) up to SIL 2 (single-channel system) or SIL 3 (redundant system) according to IEC 61508 Ed. 2
• Safe STOP up to SIL 2 (single-channel system) according to IEC 61508 Ed. 2
• Safe end position feedback signal up to SIL 2 according to IEC 61508 Ed. 2 or up to PL c according to ISO 13849 (not integral part of the certificate. A separate declaration of incorporation is available.)

Product

TIGRON-M

Multi-turn actuators

The TIGRON is a multi-turn actuator with classic mission: Automation of gate valves with/without rising stem, of globe valves (double block and bleed valves) and in combination with part-turn gearbox of butterfly valves and ball valves.

Virtually unlimited stroke

Rising stems are led through the hollow shaft of the multi-turn actuator which drives the stem in combination with the output drive type A. The stem protection tube protects the stem from pollution and people from injuries.

Open-close duty, positioning duty and modulating duty

TIGRON actuator versions are available for all types of duty. Combinations with multi-turn gearboxes In combination with GK or GST gearboxes, torques up to 16,000 Nm can be reached.

Modular AUMA scheme

Six gearbox type ranges are part of AUMA’s product portfolio. They are ideally suited to complete and enhance TIGRON’s application range even to other valve designs. This includes numerous butterfly valves or the conventional ball valves of the oil and gas industry requiring a part-turn movement of mostly 90 degrees. In these cases, TIGRON is combined with AUMA part-turn gearboxes.

AUMA linear thrust units convert TIGRON’s multi-turn movement into a thrust movement which is required for globe valve automation.

Product

SQV

Part-turn actuators

With SQV .2 part-turn actuators for open-close duty paired with ACV 01.2 actuator controls, the proven AUMA SQ/SQR range is enhanced by variable operating time models. AUMA is spearheading market technology, offering a wide operating time range with a ratio of up to 1:10.

Part-turn actuators of the SQV .2 type range are designed for open-close duty and positioning duty (classes A and B) / (short-time duty S2 - 15 min).

Product

GK bevel gearboxes

Multi-turn gearboxes

If the effective direction must be displaced by 90°, GK bevel gearboxes are used.

The output torque can be considerably multiplied.

Product

FQM/FQMEx

Part-turn actuators

With the FQM fail safe unit, AUMA offers innovative and safe actuator solutions for automatic operation of valves in case of emergencies making use of stored mechanical energy.

Constant torque characteristics across the overall torque range.

The spring is not operated during standard operation. As a consequence, actuator sizing can be relatively small.

The end position switches are automatically set during the setting procedure of end positions OPEN and CLOSED and do not require separate adjustment.

Product

SQR

Part-turn actuators

Part-turn actuators of the SQR .2 type range are designed for modulating duty (class C) S4 - 25 %.

Actuators of the SQR .2 type range can be combined with various controls: From simple OPEN-CLOSE controls to the micro-controlled version with logging of operating data or fieldbus interface.

Product

SQVEx

Part-turn actuators

With the SQVEx .2 part-turn actuators for open-close duty, AUMA offers electric actuators with variable operating time, certified for use in potentially explosive atmospheres.

Part-turn actuators of the SQVEx .2 type range are designed for open-close duty and positioning duty (classes A and B) / (short-time duty S2 - 15 min).

Product

SQRVEx

Part-turn actuators

With the SQVEx .2 part-turn actuators for modulating duty, AUMA offers electric actuators with variable operating time, certified for use in potentially explosive atmospheres.

Part-turn actuators of the SQRVEx .2 type range are designed for modulating duty (class C) S4 - 25 %.