All results 6575
Product
Multi-turn gearboxes
If the effective direction must be displaced by 90°, GK bevel gearboxes are used.
The output torque can be considerably multiplied.
To the product
Product
Multi-turn gearboxes
GP multi-turn gearboxes in combination with SA multi-turn actuators act as multi-turn actuators with higher output torques.
They are typically used with stem gate and wedge gate valves. Due to their compact design, these gearboxes can also be used in confined spaces.
To the product
Product
Part-turn gearboxes
In spite of the high degrees of automation, there are still valves requiring manual operation. This is in particular the case if the respective valves are only rarely operated for opening or closing.
The GHE type range with the housing made of bronze is suitable for operating part-turn valves (butterfly valves and ball valves), as predominantly deployed in shipbuilding.
To the product
Product
Industrial Ethernet
HART makes use of the known 4 – 20 mA standard signal for analogue data transmission. HART communication is modulated as additional signal to the analogue signal. Advantages: The digital HART signal can be transmitted simultaneously to the digital signal. The existing 4 – 20 mA infrastructure is thus also available for digital communication. Consequently, this allows for reading additional parameters and diagnostic data from field devices.
HART is based on the host-field device principle. The optional multidrop HART topology essentially complies with the line structures of fieldbus systems. In most cases, the conventional 4 – 20 mA point-to-point communication is used.
To the product
Product
SIMA
SIMA² Master Station is AUMA’s performing platform for the control and supervision of actuators via standardised fieldbus systems. The system optimises communication between host and field level and caters for efficient processes within the installation.
Configuration, operation and asset management of actuators and other field devices are simplified. A large variety of redundancy options maximises plant availability. Comprehensive diagnostic functions ensure perfect installation overview.
To the product
Product
AC (with display)
Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks, nor hot surface temperatures. Certification is performed in close collaboration with national and international certification bodies. For multi-turn actuators SAEx/SAREx 07.2 – SAEx/SAREx 16.2 and part-turn actuators SQEx/SQREx 05.2 – SQEx/SQREx 14.2, AUMATIC ACExC 01.2 actuator controls with integral local controls are available.
To the product
Product
AM (without display)
AM actuator controls with their straightforward design are the perfect choice when using parallel signal transmission while a relatively low number of feedback signals is required. Few parameters need to be defined via sliding switches during commissioning, e.g. type of seating in end positions. Control is made via operation commands OPEN, STOP, CLOSE. Reaching an end position and collective fault signals are reported back to the DCS as feedback signals. These signals are visually displayed at the local controls via the indication lights. As an option, the valve position can be transmitted as 0/4 – 20 mA signal to the DCS.
To the product
Product
AM (without display)
Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks, nor hot surface temperatures. Certification is performed in close collaboration with national and international certification bodies. For multi-turn actuators SAEx/SAREx 07.2 – SAEx/SAREx 16.2 and part-turn actuators SQEx/SQREx 05.2 – SQEx/SQREx 14.2, AUMA MATIC AMExC 01.1 actuator controls with integral local controls are available.
To the product
Product
Accessories
The sunshade is a valuable aid to protect actuator controls against environmental impacts.
To the product
Product
Accessories
Parking frame (PAF) for safe storage of unplugged electrical connections, providing protection against direct touch of open contacts.
The variants equipped with pin carriers allow preserving the available fieldbus connection when disconnecting the actuator controls.
To the product