AUMA - Solutions for a world in motion

Product

GP coaxial multi-turn gearboxes

Multi-turn gearboxes

GP multi-turn gearboxes in combination with SA multi-turn actuators act as multi-turn actuators with higher output torques.

They are typically used with stem gate and wedge gate valves. Due to their compact design, these gearboxes can also be used in confined spaces.

To the product

Product

GHE part-turn gearboxes

Part-turn gearboxes

In spite of the high degrees of automation, there are still valves requiring manual operation. This is in particular the case if the respective valves are only rarely operated for opening or closing.

The GHE type range with the housing made of bronze is suitable for operating part-turn valves (butterfly valves and ball valves), as predominantly deployed in shipbuilding.

To the product

Product

GS part-turn gearboxes

Part-turn gearboxes

AUMA part-turn gearboxes are used for operating part-turn and special valves (damper, flue gas damper, ball valves).

Type of duty: Short-time duty S2 - 15 min (open-close duty) and positioning duty
Intermittent duty S4 - 25 % (modulating duty, bronze only)
Selection of operation modes: - Manual operation directly with the handwheel - Motor operation (electric multi-turn actuator)
Swing angle 0° to 190° or multi-turn

To the product

Product

HART

Industrial Ethernet

HART makes use of the known 4 – 20 mA standard signal for analogue data transmission. HART communication is modulated as additional signal to the analogue signal. Advantages: The digital HART signal can be transmitted simultaneously to the digital signal. The existing 4 – 20 mA infrastructure is thus also available for digital communication. Consequently, this allows for reading additional parameters and diagnostic data from field devices.

HART is based on the host-field device principle. The optional multidrop HART topology essentially complies with the line structures of fieldbus systems. In most cases, the conventional 4 – 20 mA point-to-point communication is used.

To the product

Product

Fieldbus

Communication systems

Many different fieldbus systems are available on the market. Certain preferences have evolved on a regional level or specifically to certain plant applications. Since AUMA actuators are implemented in all types of technical process plants around the globe, they are available with interfaces for the different established fieldbus systems within the process automation industry.

Profibus DP
Modbus RTU
Foundation Fieldbus

Overall, AUMA devices are available with digital and analogue inputs to connect additional sensors to the fieldbus.

To the product

Product

Protection cover and lock kits

Accessories

The lockable protection covers and lock kits prevent unauthorised operation of actuator controls or handwheels.

Protection cover for AC 01.2
Protection cover for AM
Protection cover for AMExC
Lock kit for manual and motor drive
Lock for manual drive
Padlocks

To the product

Product

Sunshade

Accessories

The sunshade is a valuable aid to protect actuator controls against environmental impacts.

To the product

Product

Parking frame

Accessories

Parking frame (PAF) for safe storage of unplugged electrical connections, providing protection against direct touch of open contacts.

The variants equipped with pin carriers allow preserving the available fieldbus connection when disconnecting the actuator controls.

To the product

Product

Industrial Ethernet

Modbus TCP is a communication protocol for industrial automation technology based on Ethernet. Modbus TCP corresponds to the direct implementation of the established Modbus protocol (RTU) to a TCP/IP based communication. Existing Modbus applications can thereby easily use a connection-based, secure exchange of process data via an existing Ethernet network.

Contrary to other protocols, Modbus can handle delayed messages which occur often e.g. for modem connections or wireless networks.

This way, Modbus enables reliable control, device monitoring and data recording, even from a distance.

AUMA actuators with AC .2 actuator controls support Modbus TCP, allowing easy and flexible integration into virtually any type of network.

To the product

Product

Floor pedestals

Accessories

Floor pedestals allow an elevated mounting of actuators and gearboxes.

They are perfectly suited for manual operation of valves in pit applications.

If required, floor pedestals are also available as special versions.

To the product

Product

Power tool emergency operation

Accessories

The retrofit kit replaces the handwheel by a square head power tool adapter. This allows emergency operation of the valve by using a power tool, considerably reducing the force and time requirements in critical situations.

A combination of adapter for power tool emergency operation and stem extension is available for pit applications.

To the product

Product

Handwheel stem extension

Accessories

The handwheel stem extension allows accessibility of the handwheel even in spaces with difficult access and can be led through walls, for example.

The extension is available in a variety of lengths.

To the product

Product

Chainwheel with remote activation

Accessories

The chainwheel allows for manual operation of actuators placed at considerable heights.

A remote activation via cable hoist allows for activation of the manual operation.

To the product

Product

SEVEN

Multi-turn actuators

The use of a frequency converter specially conceived for the actuator deployment offers many advantages. Besides the variable speed, the insensitivity to voltage and frequency variations, the lack of current increase during motor start-up as well as the valve protection by soft approaching of the end positions should be mentioned.

The rugged design makes these actuators extremely resistant to environmental impacts (standard corrosivity category C5, IP67, double sealed - enclosure protection is also ensured during commissioning) and can be further enhanced as an option.

The SEVEN actuator is available in three electronic variants: ECOTRON, PROFITRON and HiMod.

To the product

Product

SQ

Part-turn actuators

Part-turn actuators of the SQ .2 type range are designed for open-close duty and positioning duty (classes A and B) / (short-time duty S2 - 15 min).

Actuators of the SQ .2 type range can be combined with various controls: From simple OPEN-CLOSE controls to the micro-controlled version with logging of operating data or fieldbus interface.

To the product

Product

SQR

Part-turn actuators

Part-turn actuators of the SQR .2 type range are designed for modulating duty (class C) S4 - 25 %.

Actuators of the SQR .2 type range can be combined with various controls: From simple OPEN-CLOSE controls to the micro-controlled version with logging of operating data or fieldbus interface.

To the product

Product

TIGRON-M

Multi-turn actuators

The TIGRON is a multi-turn actuator with classic mission: Automation of gate valves with/without rising stem, of globe valves (double block and bleed valves) and in combination with part-turn gearbox of butterfly valves and ball valves.

Virtually unlimited stroke

Rising stems are led through the hollow shaft of the multi-turn actuator which drives the stem in combination with the output drive type A. The stem protection tube protects the stem from pollution and people from injuries.

Open-close duty, positioning duty and modulating duty

TIGRON actuator versions are available for all types of duty. Combinations with multi-turn gearboxes In combination with GK or GST gearboxes, torques up to 16,000 Nm can be reached.

Modular AUMA scheme

Six gearbox type ranges are part of AUMA’s product portfolio. They are ideally suited to complete and enhance TIGRON’s application range even to other valve designs. This includes numerous butterfly valves or the conventional ball valves of the oil and gas industry requiring a part-turn movement of mostly 90 degrees. In these cases, TIGRON is combined with AUMA part-turn gearboxes.

AUMA linear thrust units convert TIGRON’s multi-turn movement into a thrust movement which is required for globe valve automation.

To the product

Product

FQM/FQMEx

Part-turn actuators

With the FQM fail safe unit, AUMA offers innovative and safe actuator solutions for automatic operation of valves in case of emergencies making use of stored mechanical energy.

Constant torque characteristics across the overall torque range.

The spring is not operated during standard operation. As a consequence, actuator sizing can be relatively small.

The end position switches are automatically set during the setting procedure of end positions OPEN and CLOSED and do not require separate adjustment.

To the product

Product

SAR

Multi-turn actuators

SAR multi-turn actuators are rated for modulating duty (class C) S4 - 25 %. Special versions for S4 - 50 % and S5 - 25 % are also available.

The actuators can be combined with different actuator controls: From simple OPEN-CLOSE actuator controls to the micro-controlled version with logging of operating data or fieldbus interface.

To the product

Product

PROFOX-QX

Part-turn actuators

Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks, nor hot surface temperatures.

Certification is performed in close collaboration with national and international certification bodies.

To the product

Product

PROFOX-MX

Multi-turn actuators

Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks, nor hot surface temperatures.

Certification is performed in close collaboration with national and international certification bodies.

To the product

Product

SAREx

Multi-turn actuators

Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks, nor hot surface temperatures.

Certification is performed in close collaboration with national and international certification bodies.

To the product

Product

SAV

Multi-turn actuators

With SAV .2 multi-turn actuators for open-close duty paired with ACV 01.2 actuator controls, the proven AUMA SA/SAR range is enhanced by variable speed models. AUMA is spearheading market technology by offering a wide speed control ratio of 1:10.

SAV multi-turn actuators are rated for open-close duty and positioning duty (classes A and B) / (short-time duty S2 - 15 min). Special sizing for longer running times is available for the S2 - 30 min duty.

To the product

Product

SA

Multi-turn actuators

SA multi-turn actuators are rated for open-close duty and positioning duty (classes A and B) / (short-time duty S2 - 15 min). Special sizing for longer running times is available for the S2 - 30 min duty.

The actuators can be combined with different actuator controls: From simple OPEN-CLOSE actuator controls to the micro-controlled version with logging of operating data or fieldbus interface.

To the product

Product

PROFOX-M

Multi-turn actuators

One solution for gate, butterfly, ball/plug and globe valves. Compact actuators with intelligent functions as platform concept for tailored automation solutions.

Each PROFOX is equipped with a centrally located LED: The FOX-EYE. It provides clearly visible information about both actuator and valve status. The FOX-EYE display scheme can be configured by the user as required.

To the product

Product

SA and GK

Multi-turn actuators

If the effective direction must be displaced by 90°, combinations of multi-turn actuators SA 07.2 – SA 16.2 / SA 25.1 – SA 48.1 and GK bevel gearboxes are used.

The output torque can be considerably multiplied.

To the product

Product

SA and GHT

Multi-turn actuators

With the multi-turn actuators SA 07.2 – SA 16.2 / SA 25.1 – SA 48.1, AUMA covers a torque range of up to 32,000 Nm.

Torques up to 120,000 Nm can be achieved by combining a multi-turn actuator with the GHT multi-turn gearbox.

To the product

Search

Selected filters

Gearboxes GS 50.3 – GS 250.3/GK 10.2 – GK 40.2 version SFC

Part-turn actuators SGC 04.1 - 12.1/SGCR 04.1 - 12.1, Parallel

Z105.278/ Z05.279/ Z05.280/ Z05.281 VERSCHLUSS-UK-HAND/ VERSCHLUSS-UK-MOT Reference for assembly

TIGRON TR-M30X - TR-M1000X, Profibus DP, Device integration fieldbus

Multi-turn actuators SAVEx 07.2 - 16.2/SARVEx 07.2 - 16.2 AUMATIC ACVExC 01.2, Non-Intrusive, Parallel, Version Spray rinse function

Multi-turn actuators SA 25.1 - 48.1/SAR 25.1 - 30.1 AUMATIC AC 01.2, Non-Intrusive, Profinet

Master station SIMA

AC(V) 01.2/AC(V)ExC 01.2, Modbus RTU, Device integration fieldbus

Multi-turn actuators SA 25.1 - 48.1/SAR 25.1 - 30.1 AUMATIC AC 01.2, Intrusive, Parallel

Part-turn actuators SQV 05.2 – SQV 14.2 SQRV 05.2 – SQRV 14.2&nbsp; with ACV 01.2 Non-Intrusive, Profinet

Test device, tester PV 1405

Master station SIMA, AUMATIC AC 01.1/AC 01.2/MATIC AM 01.1, Modbus RTU/TCP to field and Modbus to DCS

FO connection, Pofibus DP, ACExC 01.2

Painting specification P1.002 Powder coating, primer coating, finish coating and additional painting

Supplement FCC rules part 15 and RSS standards PROFOX

Multi-turn actuators SA 25.1 - 48.1/SAR 25.1 - 30.1 AUMATIC AC 01.2, Intrusive, Profibus DP

Multi-turn actuators SAVEx 07.2 - 16.2/SARVEx 07.2 - 16.2 AUMATIC ACVExC 01.2, Non-Intrusive, Modbus TCP/IP

TIGRON - Electric Multi-turn Actuator

Test and demonstration software DP-WIN (version 3.1) for Profibus DP actuators

Actuators SQ.2/SQEx.2 with AC 01.2/ACExC 01.2, Functional Safety – version SFC

Part-turn actuators SG 05.1 - 12.1/SGR 05.1 - 12.1 AUMATIC AC 01.2, Intrusive, Parallel

Multi-turn actuators SA 25.1 - 48.1/SAR 25.1 - 30.1 AUMATIC AC 01.2, Non-Intrusive, HART

Part-turn actuators SG 03.3 - 04.3 AUMATIC AC 01.1

Multi-turn actuators SAVEx 07.2 - 16.2/SARVEx 07.2 - 16.2 AUMATIC ACVExC 01.2, Non-Intrusive, Profibus DP

Multi-turn actuators SAVEx 07.2 - 16.2/SARVEx 07.2 - 16.2 AUMATIC ACVExC 01.2, Non-Intrusive, Parallel

Combi-Switch operation elements

Electric Actuators with PROFINET interface

Part-Turn actuators SQ 05.2 - SQ 14.2/SQR 05.2 - SQR 14.2 AUMATIC AC 01.2 Intrusive, Modbus RTU

Multi-turn actuators SA 07.2-UW – SA 16.2-UW SAR 07.2-UW – SAR 16.2-UW for continuous underwater use with actuator controls AC 01.2 Non-Intrusive

Multi-turn gearboxes GST 10.1 - 40.1

Supplement AUMA actuators and gearboxes with K-MASS® passive fire protection

Supplement AUMATIC AC 01.2/ACExC 01.2, version actuators: with elektronic control unit (MWG) and limit switching

Supplement Power tool for emergency operation for explosion-proof actuators

Parking frame TR-PAFEx

Test device, service unit PV 1671

Spring loaded stem nut AF 07.2 - 60.2

Multi-turn actuators SA 25.1 - 40.1/SAR 25.1 - 30.1 AUMATIC AC 01.1, Non-Intrusive, Parallel

Multi-turn actuators SAV 07.2 - 16.2/SARV 07.2 - 16.2 AUMATIC ACV 01.2, Non-Intrusive, Profinet

Multi-turn actuators SAVEx 07.2 - 16.2/SARVEx 07.2 - 16.2 AUMATIC ACVExC 01.2, Non-Intrusive, Profinet

Multi-turn actuators SA 07.2 - 16.2/SAR 07.2 - 16.2 NORM with local control unit AUMA SEMIPACT

Fail safe unit FQM 05.1 – FQM 12.1/FQMEx 05.1 – FQMEx 12.1

Z139.857 Battery pack, spare part

Part-turn actuators SQ.2/SQEx.2 with AC 01.2-SIL/ACExC 01.2-SIL, Functional Safety – SIL version

Multi-turn actuators SA 25.1-UW – SA 30.1-UW/SAR 25.1-UW – SAR 30.1-UW AUMATIC AC 01.2 Non-Intrusive for continuous underwater use

Actuator control AUMATIC ACExC 01.2, Feldbus

Part-turn actuators SGM 04.1 - 14.1/SGMR 04.1 - 14.1, Profibus DP, military ship building (navy)

Corrosion protection KS with LV P1.002

Fail safe unit FQM 05.1 – FQM 12.1/FQMEx 05.1 – FQMEx 12.1 in SIL V1.1.XX version with non safety-related actuators SQ .2/SQEx .2 with actuator controls AC/ACExC 01.2

Supplement AC 01.2/Foundation Fieldbus/Electrical connection with receptacle, type TURCK

Sunshade for AC 01.2

Supplement multi-turn actuators SA 10.2 – 16.2/SA 25.1 – SA 35.1 with break unit for civil engineering constructions for water applications according DIN 19704

Multi-turn actuators SAVEx 07.2-UW – SAVEx 16.2-UW/SARVEx 07.2-UW – SARVEx 16.2-UW, ACVExC 01.2 non-intrusive, parallel

Test device, tester PV 1644

Multi-turn actuators SA 07.2 - 16.2/SAR 07.2 - 16.2 AUMATIC AC 01.2, Non-Intrusive, DeviceNet

Actuators SQ.2/SQEx.2 NORM, Functional Safety – version SFC

Multi-turn actuators SAEx 25.1 - 40.1/SAREx 25.1 - 30.1 AUMATIC ACExC 01.1, Intrusive, Parallel

CORALINK - Getting started with the digital ecosystem by AUMA

Part-turn actuators SG 05.1 - 12.1/SGR 05.1 - 12.1 AUMATIC AC 01.1, Intrusive, Parallel

Part-turn gearboxes GS 50.3 – GS 250.3 with base and lever

Part-turn actuators SG 05.1 - 12.1/SGR 05.1 - 12.1 AUMATIC AC 01.1, Non-intrusive, Parallel

Corrosion protection KX according LV P1.001 for SAUDI ARAMCO Projects

Valve actuators SVM 05.1 - 07.5/SVMR 05.1 - 07.5, Profibus DP, military ship building (navy)

Actuator controls ACV 01.2/ACVExC 01.2, Parallel, Operation and setting

Part-turn gearboxes GS 630.3, primary reduction gearing GZ 630.3

Electric automation solutions for valves on civil vessels

Multi-turn actuators SAV 07.2 - 16.2/SARV 07.2 - 16.2 AUMATIC ACV 01.2, Non-Intrusive, Modbus RTU

Part-turn actuators SG 05.1 - 12.1/SGR 05.1 - 12.1 AUMATIC AC 01.2, Intrusive, Profibus DP

Part-turn actuators SQ 05.2 – SQ 14.2/SQR 05.2 – SQR 14.2/SQEx 05.2 – SQEx 14.2/SQREx 05.2 – SQREx 14.2 with base and lever

Valve actuators SVC 05.1 - 07.5/SVCR 05.1 - 07.5, Modbus

Part-turn actuators AS 6 - 50/ASR 6 - 50 VARIOMATIC VM-MC 01.1

Valve actuators SVM 05.1 – 07.5/SVMR 05.1 – 07.5, Profinet, military ship building (navy)

Multi-turn actuators SA 25.1 - 40.1 Brake unit

Test device PV 1339 for marine actuators SG 04.2 – SG 10.1/SV 05.1 – SV 07.1

AUMATIC AC 01.2/ACExC 01.2, Parallel, Operation and setting

Supplement electrical actuators ffor applications in hydraulic steel structures in accordance with DIN 19704

Position indication for manually operated valves, WSH/WSHEx 10.2 – 16.2

Multi-turn actuators SAVEx 07.2 - 16.2/SARVEx 07.2 - 16.2 AUMATIC ACVExC 01.2, Non-Intrusive, HART

Part-turn actuators SQEx 05.2 - SQEx 14.2/SQREx 05.2 - SQREx 14.2 AUMATIC ACExC 01.2 Non-Intrusive, Profinet

Part-turn actuators SQV 05.2 – SQV 14.2 SQRV 05.2 – SQRV 14.2 with ACV 01.2 Non-Intrusive, Profinet

Part-turn actuators SQV 05.2 – SQV 14.2 SQRV 05.2 – SQRV 14.2 with ACV 01.2 Non-Intrusive, Profibus DP