Company
Back to main menu
Back to side bar
All results 2673
Product
Industrial Ethernet
EtherNet/IP is a communication protocol for industrial automation technology based on Ethernet. EtherNet/IP uses the CIP (Common Industrial Protocol) known from DeviceNet.
AUMA actuators with AC .2 actuator controls support EtherNet/IP, allowing easy and flexible integration into virtually any type of network.
To the product
Product
Industrial Ethernet
Modbus TCP is a communication protocol for industrial automation technology based on Ethernet. Modbus TCP corresponds to the direct implementation of the established Modbus protocol (RTU) to a TCP/IP based communication. Existing Modbus applications can thereby easily use a connection-based, secure exchange of process data via an existing Ethernet network.
Contrary to other protocols, Modbus can handle delayed messages which occur often e.g. for modem connections or wireless networks.
This way, Modbus enables reliable control, device monitoring and data recording, even from a distance.
AUMA actuators with AC .2 actuator controls support Modbus TCP, allowing easy and flexible integration into virtually any type of network.
To the product
Product
Accessories
Floor pedestals allow an elevated mounting of actuators and gearboxes.
They are perfectly suited for manual operation of valves in pit applications.
If required, floor pedestals are also available as special versions.
To the product
Product
Accessories
The retrofit kit replaces the handwheel by a square head power tool adapter. This allows emergency operation of the valve by using a power tool, considerably reducing the force and time requirements in critical situations.
A combination of adapter for power tool emergency operation and stem extension is available for pit applications.
To the product
Product
Accessories
The handwheel stem extension allows accessibility of the handwheel even in spaces with difficult access and can be led through walls, for example.
The extension is available in a variety of lengths.
To the product
Product
Accessories
The chainwheel allows for manual operation of actuators placed at considerable heights.
A remote activation via cable hoist allows for activation of the manual operation.
To the product
Product
Multi-turn actuators
The use of a frequency converter specially conceived for the actuator deployment offers many advantages. Besides the variable speed, the insensitivity to voltage and frequency variations, the lack of current increase during motor start-up as well as the valve protection by soft approaching of the end positions should be mentioned.
The rugged design makes these actuators extremely resistant to environmental impacts (standard corrosivity category C5, IP67, double sealed - enclosure protection is also ensured during commissioning) and can be further enhanced as an option.
The SEVEN actuator is available in three electronic variants: ECOTRON, PROFITRON and HiMod.
To the product
Product
Part-turn actuators
Part-turn actuators of the SQ .2 type range are designed for open-close duty and positioning duty (classes A and B) / (short-time duty S2 - 15 min).
Actuators of the SQ .2 type range can be combined with various controls: From simple OPEN-CLOSE controls to the micro-controlled version with logging of operating data or fieldbus interface.
To the product
Product
Part-turn actuators
Part-turn actuators of the SQR .2 type range are designed for modulating duty (class C) S4 - 25 %.
Actuators of the SQR .2 type range can be combined with various controls: From simple OPEN-CLOSE controls to the micro-controlled version with logging of operating data or fieldbus interface.
To the product
Product
Part-turn actuators
With the FQM fail safe unit, AUMA offers innovative and safe actuator solutions for automatic operation of valves in case of emergencies making use of stored mechanical energy.
Constant torque characteristics across the overall torque range.
The spring is not operated during standard operation. As a consequence, actuator sizing can be relatively small.
The end position switches are automatically set during the setting procedure of end positions OPEN and CLOSED and do not require separate adjustment.
To the product
Product
Part-turn actuators
Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks, nor hot surface temperatures.
Certification is performed in close collaboration with national and international certification bodies.
To the product
Product
Multi-turn actuators
Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks, nor hot surface temperatures.
Certification is performed in close collaboration with national and international certification bodies.
To the product
Product
Multi-turn actuators
Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks, nor hot surface temperatures.
Certification is performed in close collaboration with national and international certification bodies.
To the product
Product
Multi-turn actuators
With SAV .2 multi-turn actuators for open-close duty paired with ACV 01.2 actuator controls, the proven AUMA SA/SAR range is enhanced by variable speed models. AUMA is spearheading market technology by offering a wide speed control ratio of 1:10.
SAV multi-turn actuators are rated for open-close duty and positioning duty (classes A and B) / (short-time duty S2 - 15 min). Special sizing for longer running times is available for the S2 - 30 min duty.
To the product
Product
Multi-turn actuators
If the effective direction must be displaced by 90°, combinations of multi-turn actuators SA 07.2 – SA 16.2 / SA 25.1 – SA 48.1 and GK bevel gearboxes are used.
The output torque can be considerably multiplied.
To the product
Product
Multi-turn actuators
With the multi-turn actuators SA 07.2 – SA 16.2 / SA 25.1 – SA 48.1, AUMA covers a torque range of up to 32,000 Nm.
Torques up to 120,000 Nm can be achieved by combining a multi-turn actuator with the GHT multi-turn gearbox.
To the product
Product
Linear actuators
Electric linear actuators performing a linear movement for automating globe valves, for example, can be combinations of SA multi-turn actuators and LE linear thrust units. If a lever arrangement has to be operated, the LE linear trust unit can also be mounted onto a base.
To the product
Product
AC (with display)
AC actuator controls are your perfect solution if the application requires self-adapting control functions, data logging, a configurable interface or if valve and actuator are to be integrated into a Plant Asset Management System due to advanced diagnostic functions.
AC actuator controls are equipped with a parallel interface for free configuration and/or interfaces to fieldbus systems as used within process automation.
The diagnostic functions comprise a time-stamped event report, torque characteristics logging, continuous recording of temperatures and vibration within the actuator and, furthermore, counting the number of starts and motor running times.
Further to the basic functions, AC actuator controls offer a number of options to meet special demands. These include torque bypass to unseat valves if tightly seated or functions for extending operating times to avoid water hammer within pipelines.
With the development of the AC 01.2, particular emphasis was laid on user-friendliness and the ease of integration of actuators into the DCS. The large graphic display is used to perform menu-controlled programming of the actuator controls, optionally using AUMA CDT via wireless Bluetooth connection. For fieldbus connections, AC programming can be performed from the control room.
To the product
Product
AC (with display)
AUMA offers sophisticated control for premium safety requirements with AC 01.2-SIL or ACExC 01.2-SIL actuators controls. SA .2 and SQ .2 actuators combined with these actuator controls can be deployed in safety-related system systems up to SIL 3. AC 01.2 actuator controls in SIL version are equipped with an additional SIL module designed for the execution of safety functions. In case of an emergency at the plant and when requesting a safety function, the standard logic of AC is bypassed and the safety function is performed via the safe SIL module. Consequently, the safety function always overrules standard operation. SA .2 and SQ .2 actuators equipped with these actuator controls have been certified by TÜV Nord. They are suitable for the following safety functions: