-
Global
-
Evropa
-
Asie a Pacifik
-
Severní Amerika
Zpět na hlavní menu
Zpět na úvodní stránku
Všechny výsledky 5403
Produkt
Otočné servopohony
Konstrukční řada SAN/SARN je určena pro automatizaci armatur v jaderných elektrárnách. Servopohony SAN/SARN se používají mimo budovu reaktoru (mimo kontejnment) a jsou certifikovány podle normy IEEE 382-2006. Servopohony SAN/SARN odolné proti rušení mohou v případě poruchy převzít bezpečnostní funkce. Otočné servopohony konstrukční řady SAN lze použít pro řídicí a polohovací režim. Servopohony SARN jsou určeny pro regulační režim.
K výrobku
Video
16.04.2026
This video shows how to manually set the type of seating for a valve on TIGRON multi-turn actuators and how to select between limit-dependent or torque-dependent seating in the end positions OPEN and CLOSE.
To the video
Video
20.04.2026
In this video, you will learn how to set the limit switching for TIGRON multi-turn actuators via the stroke in the device menu if the valve cannot be operated. For this, you can determine the suitable setting value for the stroke based on your valve data. On the basis of this value, you can then directly set the end position via the menu.
To the video
Video
20.04.2026
This video explains the Combi-Switch on TIGRON multi-turn actuators as the key operation element of the device. It describes the three operation modes LOCAL, OFF and REMOTE as well as the basic operating movements engaging, scrolling and toggling. You will learn how to safely navigate through menus, change settings and operate or configure the actuator locally depending on the mode.
To the video
Video
20.04.2026
In this video, you will learn how to set the torque switching for TIGRON multi-turn actuators via the device menu. For this, you specify the tripping torque for directions CLOSE and OPEN. Once setting is complete, perform a test run to check the correct function of the torque switching.
To the video
Video
20.04.2026
In this video, we show you how to set the limit switching of TIGRON multi-turn actuators (TR‑M30X to TR‑M1000X as well as TR‑MR30X to TR‑MR1000X) via the device menu. For this, run the actuator in end positions OPEN and CLOSED and save them. In addition, you will discover the relevant menu items and receive important information on how to proceed safely – including overrun and eventually the test run.
To the videoKontaktní osoba
Fax +92 42 3665 4594
54000 Cavalry Ground, Lahore Cantt Pakistan
Kontaktní osoba
Fax +962 - 6 - 5335800
11953 Amman Jordan
Kontaktní osoba
Fax +212 0522 35 41 52
20590 Casablanca Morocco
Kontaktní osoba
Fax
9380000 Santiago de Chile Lampa Chile