-
Global
-
Europe
-
Asia and Pacific
-
North America
Company
Back to main menu
Back to side bar
All results 5197
Product
Part-turn actuators
When combining SA multi-turn actuators with GS part-turn gearboxes, the combination acts as electric part-turn actuator fulfilling higher torque requirements.
Thus, these combinations represent a complement to the SQ part-turn actuators with their 2,400 Nm torque range limit.
To the product
Product
Part-turn actuators
The "small" electric part-turn actuator range with separate MEC controls.
All parameters are directly set at the MEC controls. The controls contain switchgear, power supply unit, interface to the DCS. The controls automatically switch the actuator off once the valve end position is reached, motor overheating is detected or a torque overload has occurred.
All housing components of the actuator are made of bronze, all external screws are made of stainless steel. This ensures complete resistance against seawater even over a longer time period. The housing of MEC controls is made of aluminium provided with AUMA powder coating also achieving a premium corrosion resistance.
The actuators are designed for open-close duty and positioning duty (classes A and B) / (short-time duty S2 - 15 min), the variant for modulating duty (class C) S4 - 40%.
To the product
Product
Part-turn actuators
The "small" electric part-turn actuator range with integral controls. All parameters are directly set at the actuator. The controls contain switchgear, power supply unit, interface to the DCS. The controls automatically switch the actuator off once the valve end position is reached, motor overheating is detected or a torque overload has occurred.
All housing components are made of bronze, all external screws are made of stainless steel. This ensures complete resistance against seawater even over a longer time period.
The SGM actuators are designed for open-close duty and positioning duty (classes A and B) / (short-time duty S2 - 15 min), the SGMR actuators for modulating duty (class C) S4 - 40%.
To the product
Product
Part-turn actuators
Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks nor hot surface temperatures.
Certification is performed in close collaboration with national and international certification bodies.
To the product
Product
Part-turn actuators
With SQV .2 part-turn actuators for open-close duty paired with ACV 01.2 actuator controls, the proven AUMA SQ/SQR range is enhanced by variable operating time models. AUMA is spearheading market technology, offering a wide operating time range with a ratio of up to 1:10.
Part-turn actuators of the SQV .2 type range are designed for open-close duty and positioning duty (classes A and B) / (short-time duty S2 - 15 min).
To the product
Product
Multi-turn gearboxes
High pressure impacts in pipelines demand multi-turn actuators supplying high torques. When combining multi-turn actuators with GHT multi-turn gearboxes, the torque range can be extended to 120,000 Nm.
To the product
Product
Multi-turn gearboxes
If the effective direction must be displaced by 90°, GK bevel gearboxes are used.
The output torque can be considerably multiplied.
To the product
Product
Multi-turn actuators
With SAV .2 multi-turn actuators for open-close duty paired with ACV 01.2 actuator controls, the proven AUMA SA/SAR range is enhanced by variable speed models. AUMA is spearheading market technology by offering a wide speed control ratio of 1:10.
SAV multi-turn actuators are rated for open-close duty and positioning duty (classes A and B) / (short-time duty S2 - 15 min). Special sizing for longer running times is available for the S2 - 30 min duty.
To the product
Product
Linear actuators
Electric linear actuators performing a linear movement for automating globe valves, for example, can be combinations of SA multi-turn actuators and LE linear thrust units. If a lever arrangement has to be operated, the LE linear trust unit can also be mounted onto a base.
To the product
Product
Multi-turn gearboxes
GP multi-turn gearboxes in combination with SA multi-turn actuators act as multi-turn actuators with higher output torques.
They are typically used with stem gate and wedge gate valves. Due to their compact design, these gearboxes can also be used in confined spaces.
To the product
Product
Multi-turn gearboxes
If the drive shaft is to be positioned at a certain angle to the output drive shaft, combinations of the SA multi-turn actuators with GST spur gearboxes are used.
The output torque can be considerably multiplied.
To the product
Product
Part-turn gearboxes
In spite of the high degrees of automation, there are still valves requiring manual operation. This is in particular the case if the respective valves are only rarely operated for opening or closing.
The GHE type range with the housing made of bronze is suitable for operating part-turn valves (butterfly valves and ball valves), as predominantly deployed in shipbuilding.
To the product
Product
Part-turn gearboxes
AUMA part-turn gearboxes are used for operating part-turn and special valves (damper, flue gas damper, ball valves).
Product
Industrial Ethernet
HART makes use of the known 4 – 20 mA standard signal for analogue data transmission. HART communication is modulated as additional signal to the analogue signal. Advantages: The digital HART signal can be transmitted simultaneously to the digital signal. The existing 4 – 20 mA infrastructure is thus also available for digital communication. Consequently, this allows for reading additional parameters and diagnostic data from field devices.
HART is based on the host-field device principle. The optional multidrop HART topology essentially complies with the line structures of fieldbus systems. In most cases, the conventional 4 – 20 mA point-to-point communication is used.
To the product
Product
SIMA
SIMA² Master Station is AUMA’s performing platform for the control and supervision of actuators via standardised fieldbus systems. The system optimises communication between host and field level and caters for efficient processes within the installation.
Configuration, operation and asset management of actuators and other field devices are simplified. A large variety of redundancy options maximises plant availability. Comprehensive diagnostic functions ensure perfect installation overview.
To the product
Product
AC (with display)
Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks, nor hot surface temperatures. Certification is performed in close collaboration with national and international certification bodies. For multi-turn actuators SAEx/SAREx 07.2 – SAEx/SAREx 16.2 and part-turn actuators SQEx/SQREx 05.2 – SQEx/SQREx 14.2, AUMATIC ACExC 01.2 actuator controls with integral local controls are available.
To the product
Product
AM (without display)
Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks, nor hot surface temperatures. Certification is performed in close collaboration with national and international certification bodies. For multi-turn actuators SAEx/SAREx 07.2 – SAEx/SAREx 16.2 and part-turn actuators SQEx/SQREx 05.2 – SQEx/SQREx 14.2, AUMA MATIC AMExC 01.1 actuator controls with integral local controls are available.
To the product
Product
Accessories
The sunshade is a valuable aid to protect actuator controls against environmental impacts.
To the product
Product
Accessories
Parking frame (PAF) for safe storage of unplugged electrical connections, providing protection against direct touch of open contacts.
The variants equipped with pin carriers allow preserving the available fieldbus connection when disconnecting the actuator controls.
To the product
Product
Multi-turn actuators
Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks nor hot surface temperatures.
Certification is performed in close collaboration with national and international certification bodies.
To the product