Combinations SA ... GS

Combinations multi-turn actuators SA ... with worm gearboxes GS

Combination SA ... with worm gearbox GS

By combining the multi-turn actuators SA with the worm gearboxes GS, they are turned into electric part-turn actuators for higher torque requirements. These combinations supplement the part-turn actuator ranges SG and ASR whose torque ranges are limited to 1,200 Nm or 500 Nm, respectively.

Design features:

Torque range from 250 Nm to 360,000 Nm
Swing angles up to 100°
Operating times for 90 ° from 9 s to 780 s
adjustable end stops
self-retaining
Handwheel for manual operation

Ambient conditions:

High enclosure protection
High quality corrosion protection
Wide ambient temperature ranges

Options:

Swing angles > 100° or multi-turn (without end stops)

Interfaces:

Electrical connection via AUMA plug/ socket connector (optionally terminals)
Cable entries in different versions
Output drive types according to ISO standard

Selected documents:

other languages

		Operation instructions
		Part-turn gearboxes GS 160 - 500, primary reduction gearings GZ 14 - 40... (60 KB)

		Part-turn gearboxes GS 50.3 - 250.3, primary reduction gearings VZ 2.3 - 4.3/GZ... (1320 KB)

		Dimension sheets
		Part-turn gearboxes GS 315 - GS 500, GZ 30.1 - 40.1 (247 KB)

		Part-turn gearboxes GS 160.3, GZ 160.3 (221 KB)

		Part-turn gearbox GS 200.3, GZ 200.3 (152 KB)

		Part-turn gearbox GS 250.3, GZ 250.3 (169 KB)

		Part-turn gearboxes GS 50.3 - 125.3 (104 KB)